[Linuxptp-devel] Trying to use ptp4l

[Bassam Alsanie]

I have two machines each one has an i210 Ethernet (PTP Enabled) connect
together via Ethernet cable. I run the ptp4l on both machines, but I don't
see continues correction or any output messages that show the offsets ,
they are on the same output message for an hour! attached the command I
used and the output.

I am I missing something here?

Thank you

[Keller, Jacob E]

Post by Bassam Alsanie
I have two machines each one has an i210 Ethernet (PTP Enabled)
connect together via Ethernet cable. I run the ptp4l on both
machines, but I don't see continues correction or any output messages
that show the offsets , they are on the same output message for an
hour! attached the command I used and the output.
I am I missing something here?
Thank you

You probably need to increase the log level

Regards,
Jake
------------------------------------------------------------------------------

[Richard Cochran]

Post by Bassam Alsanie
I am I missing something here?

No packets are getting through. Check your firewall rules.

Thanks,
Richard

------------------------------------------------------------------------------